Edge CTS Uživatelská příručka Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 28
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
Edge Products ______________________________________GM Juice-Attitude CS/CTS
11
2. Route the turbo timer wire with the red female connector end into the side of the fuse
box to connect the turbo timer.
3. Locate and remove the 10 amp “TBC BATT” from inside the engine compartment fuse
panel.
4. Insert the Leaded Fuse Link (see figure 11). The leg with the wire soldered to it needs
to plug into the “HOT” side of the fuse location. Orient the fuse exactly as shown in
fuse box picture below.
5. Plug the routed turbo timer cable (routed in step 2) into the leaded fuse link connector.
Note: The Turbo timer will not function unless the vehicle has the Attitude CS/CTS
monitor installed.
LEADED FUSE LINK
Note: Reference the Diesel chart inside the fuse box cover or operators manual for fuse
identification.
To Firewall
WIRE
Leaded
Fuse Link
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Komentáře k této Příručce

Chrisfoomo 26 Apr 2024 | 22:39:06

Hello, im noob :)